Sticky brick Wang to make up for the defects of the cement and polymer mortar, because of water resistance, good adhesion and durability, to overcome the ordinary cement, waterproof mortar or tile binder for paste materials, decorative brick stick drawbacks of the junction is not strong, hollowing, cracking, loss, seepage, performance instability, from the building envelope waterproofing hand side to the bonding of decorative building materials, waterproof and have shown superior performance. It is based on the theory of organic - inorganic, by the best polymer mixed in mixing, strict control of the polymer and other materials mixed in the ratio. Characteristics of the inorganic cement, and organic adhesive bonding characteristics of waterproof, bonded to one. 
 Product details: 

 Product details: 

 An Introduction "sticky bricks" to make up for the defects of the cement and polymer mortar, because of water resistance, good adhesion and durability, to overcome the ordinary cement, waterproof mortar or tile binder for paste materials decorative brick bond is not strong, hollowing, cracking, loss, seepage performance and unstable defects existing at the time, from the building envelope waterproofing hand side to the bonding of decorative building materials, waterproof and have shown superior performance. It is based on the theory of organic - inorganic, by the best polymer mixed in mixing, strict control of the polymer and other materials mixed in the ratio. Characteristics of the inorganic cement, and organic adhesive bonding characteristics of waterproof, bonded to one. By ISO9001 international quality system standard production of polymer modified cement-based environmental inorganic waterproof material "sticky bricks" is the alternative to traditional cement and polymer mortar, the best of modern high-grade building, waterproof adhesive material. 

 Second, product characteristics: 
 An excellent anti-aging, waterproof, crack resistance, impermeability, alkali, weather resistance, high temperature, corrosion-resistant features, the new generation of environmentally friendly permanent material. 
 2, low shrinkage, water retention, not hollowing with the tile adhesive, does not crack: 
 The products contain the water retention factor, making the tile adhesive can be an adequate response to penetrate the tile and substrate internal pore cementation of the tile and the substrate. 
 3, strong bond, does not fall off: 
 The product contains a flexible polymer, so that the tile adhesive bond position from the point into the surface, increasing the bonding area, thereby enhancing the material bond strength, bonding degree of intensity is 6-8 times higher than traditional cement method, 
 Construction performance, anti-sagging, anti-sagging, long airing adjust the time, the quality of the project is more guaranteed. 
 5, the flexibility to adapt to the deformation of the substrate and tile, weathering resistance. 
 6, the slurry flexibility strength, the adhesive layer is thinner, with less suitable for thin-layer construction, material savings. 
 Construction do not dip the brick wet wall, the process is simple, coherent construction, construction greatly accelerate the speed and improve work efficiency. 
 Cater to rigid waterproof layer, waterproof, fine paste into one. 
 9, standard products, add water and stir evenly, easy construction. Non-toxic, odorless, anti-alkaline, and an environmentally friendly product. 

 Third, the scope of application 
 1, suitable for a variety of stone slab, sandstone, tile adhesive and waterproof. 
 2, suitable for high-rise building external wall surface of the base paste decorative bricks, tiles, mosaic and so on. Super-adhesive and waterproof. 
 3 series in the light steel plate (gypsum board, the Aitken board, plywood), low water absorption of paste board decorative brick. 
 4, can be used for ordinary clay bricks, sand lime bricks, fly ash bricks, concrete, hollow brick, aerated concrete, foam concrete wall waterproof layer (or part paints bottom ash). 
 5, can be used for external walls, basements, tunnels, subway water paste works. 

 Fourth, performance, appearance: gray / homogeneous / dry powder. 
 2, the best results the detection time ≥ 14 to 28 days. 
 3, has opened products used within 2 hours. 
 4, the product is non-toxic, flammable, please put: dry, cool, avoid sunlight warehouse; stacked on the ground, with a wood bedding to prevent damp. 
 5, the transport requirements: moisture, to avoid the rain, to prevent the hit down the destruction of packaging. (Non-dangerous goods) 
 6, Packing: 25kg / bag. 

 5, the reference amount 
 1, the ratio 
 Powder: water = 4:1 
 2, the amount of 
 1.2-1.5kg/m2 
 Products and other parameters: 

 (1) the tensile bond strength: ≥ 0.60Mpa 
 Fold pressure: ≤ 3.0Mpa 
 3. Impermeability pressure: 1.5mm coating ≥ 0.3Mpa 
 Four freeze-thaw test: (-15 ℃ to 20 ℃ 25 cycles), qualified 
 Water resistance: (7d) ≥ 0.5 Mpa 
 (6) high temperature: (7d) ≥ 0.5 Mpa (no cracking, peeling, flaking) 
 Alkali resistance: (sodium hydroxide soak for 500 hours), qualified 
 8 tiles fixed within five minutes, rotate 90 degrees, does not affect the adhesion.